Hazard Anti Slip Tapes

$33.00$316.80

Hazard Anti Slip Tapes

Sizes:

Available in 25mm, 50mm 100mm 150mm, 200mm & 300mm in most colours

Please Email us for an immediate quote.

Description

Introduction:

The range of Anti-slip self-adhesive grip tape has the highest possible safety rating and is particularly suitable for both internal & external applications. Used extensively on steps, stairways and ramps the product exceeds the requirements of the Australia/New Zealand Standards for anti-slip AS4586:2013 Appendix ‘A’. Slip resistance classification of new pedestrian surface materials and the National Construction code. Slip tests carried out under AS4586:2013 had a BPN average Reading of 83 and Slip resistance Classification P5

Sizes:

Our Hazard Anti Slip Tapes are available in 25mm, 50mm 100mm 150mm, 200mm & 300mm in most colours

Compliance:

The Hazard Anti Slip Tapes comply with the following standards;

  • National Construction Code o Section D2.13 o Section D3.3
  • Australian/New Zealand Standards AS1428.1 – 2009 Design for access and mobility
  • Each step shall have a strip not less than 50mm and not more than 75mm deep across the full width of the path of travel. The strip may be set back a maximum of 15mm from the front of the step. The strip shall have a minimum luminance contrast of 30% to the background.
  • Australian/New Zealand Standards AS1428.2 – 1992 Design for access and mobility

Further Information on Australian/New Zealand Standards click here

Technical Data:

  • Aluminium Oxide
  • Grit Grade: #60
  • Holding Medium: Solvent Acrylic Adhesive
  • Tensile Strength: 7kgf/25mm
  • Elongation at break: 80%
  • Application Temp: -5c to 50c
  • Resistance to Water: 12 months
  • Resistance to Grease: 8 months
  • Staining of Adhesive: No evidence of migration

Similar Products:

Additional information

Choose Option

25mm x 18.3m, 50mm x 18.3m, 100mm x 18.3m, 150mm x 18.3m, 200mm x 18.3m, 300mm x 18.3m