Anti-Slip Strips – Fibreglass 50mm x 3620mm

$46.20

Request a supply quote Get an installation quote

Freight is quoted to your postcode. Want it installed? We supply and install across South East Queensland and Victoria. Call Qld (07) 3811 5085 or Vic (03) 9021 2512.

SKU: FG50 Category: Tags: , , , ,

Description

The Anti-Slip Strips – Fibreglass 50mm x 3620mm are made from 2.5mm Fibreglass strip finished with a 2-part Polyurethane UV & chemical resistant coating.

Please Email us for an immediate quote.

Introduction:

2.5mm thick Fibreglass stripes are manufactured to provide a tough, flexible & abrasion slip resistant finish for internal & external use.
The fibreglass base is constructed with a #36 grade silicon carbide anti-slip granule. 2 coats of a special 2-part Polyurethane coating is then applied over to achieve a hard wearing, UV & chemical resistant anti-slip surface

Principal Characteristics:

  • Length: Available in 3620mm lengths or cut to required sizes
  • Colour: Standard colours of Safety Yellow, Black, White, or Grey.
  • Tough, flexible and abrasion resistant
  • Unlimited re-coat
  • Excellent resistance to atmospheric exposure
  • Excellent colour and gloss retention
  • Resistant to splash of mineral and vegetable oils, white sprit, paraffins and aliphatic petroleum products

Fixing:

On suitable surfaces the anti-slip strip can be fixed using an adhesive or by drilling and screwing.
We recommend if fixing by drilling & screwing to place a bead of adhesive under the anti-slip strip.

Compliance

Our Anti-slip tapes comply with the following standards:

  • National Construction Code o Section D2.13 o Section D3.3
  • Australian/New Zealand Standards AS1428.1 – 2009 Design for access and mobility
  • Anti-slip safe to AS/NZS 4586:2004

Further Information on Australian/New Zealand Standards click here

Stairways & Steps:

To comply to the Building Code each step shall have a strip not less than 50mm and not more than 75mm deep across the full width of the path of travel. The strip may be set back a maximum of 15mm from the front of the step. The strip shall have a minimum luminance contrast of 30% to the background.

Test Results:

According to Table 2 AS/NZS 4586:2004 Classification of surface materials the coating with grit finish achieves a classification of a P5 which is equivalent to a very low contribution to the risk of slipping when wet. When tested the product reached a mean BPN>71 and has a slip resistant classification of P5.

Similar Products:

 

Related products