Description
Introduction:
The range of Anti-slip self-adhesive grip tape has the highest possible safety rating and is particularly suitable for both internal & external applications. Used extensively on steps, stairways and ramps the product exceeds the requirements of the Australia/New Zealand Standards for anti-slip AS4586:2013 Appendix ‘A’. Slip resistance classification of new pedestrian surface materials and the National Construction code. Slip tests carried out under AS4586:2013 had a BPN average Reading of 83 and Slip resistance Classification P5
Sizes:
Our Clear Anti Slip Tapes is available in 25mm & 50mm
Compliance:
The Clear Anti Slip Tapes comply with the following standards;
- National Construction Code o Section D2.13 o Section D3.3
- Australian/New Zealand Standards AS1428.1 – 2009 Design for access and mobility
- Each step shall have a strip not less than 50mm and not more than 75mm deep across the full width of the path of travel. The strip may be set back a maximum of 15mm from the front of the step. The strip shall have a minimum luminance contrast of 30% to the background.
- Australian/New Zealand Standards AS1428.2 – 1992 Design for access and mobility
Further Information on Australian/New Zealand Standards click here
Technical Data:
- Aluminium Oxide
- Grit Grade: #60
- Holding Medium: Solvent Acrylic Adhesive
- Tensile Strength: 7kgf/25mm
- Elongation at break: 80%
- Application Temp: -5c to 50c
- Resistance to Water: 12 months
- Resistance to Grease: 8 months
- Staining of Adhesive: No evidence of migration
