Anti-Slip Strips- Metal 50mm x 2400
$60.50
The Anti-Slip Strips- Metal 50mm x 2400 are made from 1.6mm Galvanised metal strip coated with 3 coats of 2-part polyurethane anti-slip coating.
For custom cut sizes @ $24.20 per metre.
Please Email us for an immediate quote.
Description
The Anti-Slip Strips- Metal 50mm x 2400 are made from 1.6mm Galvanised metal strip coated with 3 coats of 2-part polyurethane anti-slip coating.
Please Email us for an immediate quote.
Introduction
Our Carborundum Anti-slip inserts have been specially made for installation over new and existing steps, ramps and stairways. It is applicable where pedestrian safety and stair longevity are the particular concerns.
The strip inserts are constructed from a 1.6mm galvanised flat metal strip and coated with a two part Polyurethane coating. Two coats of the special 2-part anti-slip Polyurethane coating is applied over to achieve a hard wearing, UV & chemical resistant surface. A final coating locks in the #60 grade diamond oxide anti-slip granules to achieve a tough, flexible & abrasion slip resistant finish.
Ultimate In Anti-Slip Safety
This product provides the highest possible safety rating and is particularly suitable for external wet areas. The finished product exceeds the requirements of the Australian/New Zealand Standards AS/NZS 4586:2004 and has a V value and rated R11 under a ramp test.
Compliance:
The Anti-Slip Strips- Metal 50mm x 2400 are Anti-slip safe to AS/NZS 4586:2004
Further Information on Australian/New Zealand Standards click here
Features:
- Length: Available in 2400mm lengths or cut to required sizes
- Colour: Standard colours of Safety Yellow, Black, White or Grey. All other colours can be made by request.
- Tough, flexible and abrasion resistant
- Unlimited re-coat
- Excellent resistance to atmospheric exposure
- Excellent colour and gloss retention
- Resistant to splash of mineral and vegetable oils, white sprit, paraffin and aliphatic petroleum products
- Resistant to most chemicals
- Guaranteed for 5 years
Similar Products:
Related products
- Stainless Steel Tactile Plates
PVD Tactiles on Stainless Steel Plate 600 x 300mm
Our PVD Tactiles on Stainless Steel Plate 600 x 300mm are made from 316 Polished stainless steel plate complete with...
View Details - Brass Tactiles
Brass Tactile with 20mm self-locking stem
- Type: Warning tactile
- Material: Solid Brass
- Dimensions: Outer Diameter 35mm x top diameter 25mm x Height 4.5mm
- Stem:...
View Details - Plastic Tactiles, Self Stick Tactiles, Tactiles, Warning Tactile
Self-Stick Plastic Tactiles
Suitable Substrates:
- Concrete
- Tiles
- Marble
- Bluestone
- Any Smooth flat surface
99.9% surface adhesion with 3M self stick adhesive.
Available Colours: Black and Yellow
Dimensions: Outer Diameter 35mm...
View Details - Directional Bars
Directional Bar – 316 Stainless Steel
The Directional Bar - 316 Stainless Steel consist of 12 groove line per piece. 290mm x 35mm x 5mm...
View Details